Photo AI

The rate equation for the reaction between compounds A and B is rate = k[A]^x[B]^y - AQA - A-Level Chemistry - Question 2 - 2017 - Paper 2

Question icon

Question 2

The-rate-equation-for-the-reaction-between-compounds-A-and-B-is--rate-=-k[A]^x[B]^y-AQA-A-Level Chemistry-Question 2-2017-Paper 2.png

The rate equation for the reaction between compounds A and B is rate = k[A]^x[B]^y. Figure 2 shows how, in an experiment, the concentration of A changes with time,... show full transcript

Worked Solution & Example Answer:The rate equation for the reaction between compounds A and B is rate = k[A]^x[B]^y - AQA - A-Level Chemistry - Question 2 - 2017 - Paper 2

Step 1

Draw a tangent to the curve at t = 0

96%

114 rated

Answer

At time t = 0, draw a straight line that touches the curve at the point corresponding to [A] = 0.50 mol dm⁻³. This tangent line should extend through the y-axis and approximate the slope of the curve at this point.

Step 2

Use this tangent to deduce the initial rate of the reaction

99%

104 rated

Answer

Calculate the gradient of the tangent. Based on the graph, the concentration of A decreases from 0.50 mol dm⁻³ to approximately 0.45 mol dm⁻³ over a small time interval of about 0.5 seconds. Thus, the initial rate can be determined using:

extRate=Δ[A]Δt=0.500.450.5=0.050.5=0.10mol dm3exts1 ext{Rate} = -\frac{\Delta[A]}{\Delta t} = -\frac{0.50 - 0.45}{0.5} = -\frac{0.05}{0.5} = 0.10 \, \text{mol dm}^{-3} \, ext{s}^{-1}

Step 3

Calculate the new initial concentration of A

96%

101 rated

Answer

Let the initial concentration of A in the first experiment be [A]₁, and in the second experiment [A]₂. The relationship between the two rates is given by:

Ratenew=1.7×Rateoriginal\text{Rate}_{\text{new}} = 1.7 \times \text{Rate}_{\text{original}}

Using the original initial rate as 0.10 mol dm⁻³ s⁻¹:

Ratenew=1.7×0.10mol dm3s1=0.17mol dm3s1\text{Rate}_{\text{new}} = 1.7 \times 0.10 \, \text{mol dm}^{-3} \, \text{s}^{-1} = 0.17 \, \text{mol dm}^{-3} \, \text{s}^{-1}

From the original rate equation, we know:

Rate=k[A]x[B]y\text{Rate} = k[A]^x[B]^y

Assuming the concentration of B is constant, the new initial concentration can be calculated as follows: Let [A]₁ = 0.50 mol dm⁻³ (initial),

Using the relationship: [ [A]₂ = [A]₁ \times \textfactor\n] [ \text{Rate}_{\text{new}} = k [A]₂^x[B]^y\n] [ 0.17 = k[A]^x[B]^y\n] Solving gives the new concentration as:

[A]2=0.170.10[A]1=0.50×1.7=0.85mol dm3[A]₂ = \frac{0.17}{0.10} [A]₁ = 0.50 \times 1.7 = 0.85 \, \text{mol dm}^{-3}

Join the A-Level students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;