Photo AI

Figure 5 shows a simplified catapult used to hurl projectiles a long way - AQA - A-Level Physics - Question 4 - 2019 - Paper 1

Question icon

Question 4

Figure-5-shows-a-simplified-catapult-used-to-hurl-projectiles-a-long-way-AQA-A-Level Physics-Question 4-2019-Paper 1.png

Figure 5 shows a simplified catapult used to hurl projectiles a long way. The counterweight is a wooden box full of stones attached to one end of the beam. The proj... show full transcript

Worked Solution & Example Answer:Figure 5 shows a simplified catapult used to hurl projectiles a long way - AQA - A-Level Physics - Question 4 - 2019 - Paper 1

Step 1

Suggest how the pivot position achieves this.

96%

114 rated

Answer

The pivot position is centered at the center of mass of the beam and the empty wooden box, ensuring that the moments balance out around the pivot. As a result, the weight of the beam and the empty box does not create any net torque that would affect the tension in the rope.

Step 2

Calculate the tension in the rope.

99%

104 rated

Answer

To calculate the tension in the rope, we need to consider the balance of moments about the pivot. The clockwise moment due to the counterweight (stones) is equal to the anti-clockwise moment due to the weight of the projectile.

The total weight of the stones is calculated as:

610extkgimes9.81extm/s2=5976.6extN610 ext{ kg} imes 9.81 ext{ m/s}^2 = 5976.6 ext{ N}

The anti-clockwise moment using the distance 4 m is:

extAnticlockwisemoment=250extNimes4extm=1000extNm ext{Anti-clockwise moment} = 250 ext{ N} imes 4 ext{ m} = 1000 ext{ Nm}

Setting clockwise moments equal to anti-clockwise moments:

Times1.5extm=5976.6extNm1000extNmT imes 1.5 ext{ m} = 5976.6 ext{ Nm} - 1000 ext{ Nm}

Therefore,

T = rac{4976.6 ext{ Nm}}{1.5 ext{ m}} = 3317.73 ext{ N}

Thus, the tension in the rope is approximately 3318 N.

Step 3

Calculate the range.

96%

101 rated

Answer

To find the range of the projectile, we first calculate the time of flight using the height of 7.5 m.

Using the formula for vertical motion:

h = rac{1}{2} g t^2

where:

  • h=7.5h = 7.5 m,
  • g=9.81g = 9.81 m/s².[solve for t]

Rearranging gives:

t = ext{sqrt} rac{2h}{g} = ext{sqrt} rac{2 imes 7.5}{9.81} ext{ ans = 1.23 s}

Next, we calculate the horizontal distance covered:

extrange=vimest=18extm/simes1.23exts=22.14extm ext{range} = v imes t = 18 ext{ m/s} imes 1.23 ext{ s} = 22.14 ext{ m}

So, the range is approximately 22.14 m.

Step 4

Discuss the effect this change has on the range of the catapult.

98%

120 rated

Answer

When the projectile is released just before the beam is vertical, it will depart with a vertical component of velocity, rather than a horizontal one. As a result, this vertical component will reduce the overall initial horizontal velocity of the projectile.

Consequently, the range will be less compared to when the projectile is launched horizontally because:

  • The time of flight may be shorter if the projectile descends vertically immediately after release.
  • The horizontal distance traveled will be less due to the loss of horizontal momentum.

Overall, the change in the release position leads to a decreased range for the projectile.

Join the A-Level students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;