The diagram shows a simple generator connected to a lamp - Edexcel - GCSE Physics - Question 6 - 2013 - Paper 1
Question 6
The diagram shows a simple generator connected to a lamp.
The magnet is made to spin at a steady speed.
The ammeter gives a reading of 1.5 A.
The voltmeter gives a ... show full transcript
Worked Solution & Example Answer:The diagram shows a simple generator connected to a lamp - Edexcel - GCSE Physics - Question 6 - 2013 - Paper 1
Step 1
Calculate the output power of the generator.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To determine the output power of the generator, we use the formula:
extoutputpower=extvoltageimesextcurrent
Given the voltage (V) is 6 V and the current (I) from the ammeter is 1.5 A, we can substitute these values into the equation:
extoutputpower=6imes1.5=9extW
Step 2
State two changes to the design of the generator that would give a larger output power for the same speed of rotation.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Use more turns on the coil. By increasing the number of turns in the coil, the induced electromotive force (EMF) will increase, leading to higher output power.
Employ a more powerful or stronger magnet. Utilizing a magnet with greater strength will enhance the magnetic field strength, thereby increasing the output power.
Step 3
Describe the difference between charge movement in a direct current and in an alternating current.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
In a direct current (DC), electric charge flows in one direction only. This means that the polarity remains constant, and the electrons move steadily from the negative terminal to the positive terminal.
In contrast, an alternating current (AC) causes the charge to change direction periodically. The current flows in one direction for a short time before reversing and flowing in the opposite direction, allowing the charges to move back and forth.