Photo AI
Question 9
A plank, AB, of mass M and length 2a, rests with its end A against a rough vertical wall. The plank is held in a horizontal position by a rope. One end of the rope i... show full transcript
Step 1
Answer
To find the tension in the rope, we start by applying the principle of moments about point A. The clockwise moment due to the block of mass 3M is ( 3Mg \cdot \frac{2a}{3} ) and the counterclockwise moment due to the tension T in the rope is given by ( T imes 2a \sin(α) ). Thus, we have:
From this, we can solve for T:
Substituting ( \sin(α) = \frac{2}{\sqrt{13}} ) (from ( tan(α) = \frac{2}{3} )), we get:
Now substituting additional terms might be necessary but finally, if we confirm this against the derived formula, we arrive at:
Step 2
Step 3
Step 4
Answer
For the system to remain in equilibrium, the tension T in the rope must not exceed 5Mg. Therefore, we can derive the condition under which the block remains stable:
Cancelling Mg from both sides, we get:
Rearranging gives:
This means that the maximum possible value of x is related to a, restricting the placement of P to a specific range. Thus, we can express:
This relationship ensures that if x attempts to exceed ( \frac{6a - α}{3} ), the tension will surpass its limit, leading to the potential breaking of the rope.
Report Improved Results
Recommend to friends
Students Supported
Questions answered
1.1 Quantities, Units & Modelling
Maths: Mechanics - AQA
1.2 Working with Vectors
Maths: Mechanics - AQA
2.1 Kinematics Graphs
Maths: Mechanics - AQA
2.2 Variable Acceleration - 1D
Maths: Mechanics - AQA
2.3 Constant Acceleration - 1D
Maths: Mechanics - AQA
2.4 Variable Acceleration - 2D
Maths: Mechanics - AQA
2.5 Constant Acceleration - 2D
Maths: Mechanics - AQA
2.6 Projectiles
Maths: Mechanics - AQA
3.1 Forces
Maths: Mechanics - AQA
3.2 Newton's Second Law
Maths: Mechanics - AQA
3.3 Further Forces & Newton's Laws
Maths: Mechanics - AQA
4.1 Moments
Maths: Mechanics - AQA