Photo AI

Complete the table below regarding different irrigation systems - NSC Agricultural Technology - Question 6 - 2018 - Paper 1

Question icon

Question 6

Complete-the-table-below-regarding-different-irrigation-systems-NSC Agricultural Technology-Question 6-2018-Paper 1.png

Complete the table below regarding different irrigation systems. Write only the answer next to the question numbers (6.1.1 to 6.1.4). NAME EXPLANATION/FUNCTION/WORK... show full transcript

Worked Solution & Example Answer:Complete the table below regarding different irrigation systems - NSC Agricultural Technology - Question 6 - 2018 - Paper 1

Step 1

6.1.1 Sprinkler irrigation consisting of several segments of pipe joined together and supported by trusses, mounted on wheeled towers with sprinklers positioned along its length. Permanently fixed to a middle point.

96%

114 rated

Answer

Centre pivot irrigation

Step 2

6.1.2 Hydroponics

99%

104 rated

Answer

PVC pipes with plastic or brass sprinklers

Step 3

6.1.3 Travelling gun sprinkler

96%

101 rated

Answer

Sprinklers can irrigate areas such as small farms, parks and pastures

Step 4

6.1.4 A series of pipes, each with a wheel of about 1.5 m diameter. Sprinklers along its length with an engine installed at the middle of the pipe system for driving the system.

98%

120 rated

Answer

Lateral wheel line irrigation

Step 5

6.2 State FOUR disadvantages of using a flood irrigation system.

97%

117 rated

Answer

  1. When water supply is weak flood irrigation is impossible.
  2. Surface gradient (steep) leads to erosion.
  3. Infiltration tempo not constant.
  4. Increase salinity in soil.

Step 6

6.3 The functions of the following parts of an irrigation system:

97%

121 rated

Answer

6.3.1 Sand filter: Prevent blockage of sprinkler nozzles / filters the water. 6.3.2 Sprinkler: Provide water to plants. 6.3.3 Pump: Provide water to the system / sprinklers. 6.3.4 Solenoid valve: Controlling the water flowing through the system. 6.3.5 One way valve: Prevent water from flowing back to the pipe.

Step 7

6.4.1 Name devices A and B above.

96%

114 rated

Answer

A: Tensio meter B: Evaporation pan/Class – A pan

Step 8

6.4.2 What is the main purpose of the devices shown above?

99%

104 rated

Answer

To determine the water evaporation rate in a specific field.

Step 9

6.5 Name TWO devices that are used to control garden watering systems.

96%

101 rated

Answer

  1. Electronic irrigation timer
  2. Mechanical timer

Step 10

6.6 Describe the operation of a septic tank drainage system.

98%

120 rated

Answer

Sewage is broken down by anaerobic bacteria in the first tank. Very little solids remain when the watery sewage flows to the second tank. Only liquid sewage remains and drains away through the outlet pipe or stone trench.

Step 11

6.7 Name THREE points to consider when identifying a suitable location for installing a septic tank.

97%

117 rated

Answer

  1. The tank should not be built near boreholes and drinking water installations.
  2. A suitable distance away from the house.
  3. Not near traffic.

Step 12

6.8 Describe the operation of a pipe drainage system.

97%

121 rated

Answer

The water drains through the surface gravel/sewage and seeps into the pipe's perforations before traveling out the end of the pipe into an area that can accommodate extra water.

Step 13

6.9 Name THREE types of water purification systems that use a membrane to purify household water.

96%

114 rated

Answer

  1. Reverse osmosis
  2. Faucet filters
  3. Under sink or inline filter

Join the NSC students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;