FIGUUR 4.1 hieronder toon die vooraansig van 'n enkelwaairoomvenster met twee vensteruite - NSC Civil Technology Civil Services - Question 4 - 2017 - Paper 1
Question 4
FIGUUR 4.1 hieronder toon die vooraansig van 'n enkelwaairoomvenster met twee vensteruite. Die tappe van alle voie is deurloop. Die horings is 25 mm lank aan beideka... show full transcript
Worked Solution & Example Answer:FIGUUR 4.1 hieronder toon die vooraansig van 'n enkelwaairoomvenster met twee vensteruite - NSC Civil Technology Civil Services - Question 4 - 2017 - Paper 1
Step 1
4.1.1 Die eenheid
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die eenheid van meting wat hier gebruik word, is millimeter (mm).
Step 2
4.1.2 Die lengte
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die lengte van die venster is 780 mm.
Step 3
4.1.3 Die dikte
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die dikte van die vensterraam is 44 mm.
Step 4
4.1.4 Die kop
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die kop van die venster is 2 mm.
Step 5
4.1.5 Die sterkte
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die sterkte van die venster is 60/60 mm.
Step 6
4.2.1 Die hoofverskil
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die hoofverskil tussen spoorskriewe en ander skriewe, soos stapelmuurskriewe en rondeokskrewe, is die A. lengte.
Step 7
4.2.2 Spykers gebruik
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Spykers wat gebruik moet word om vloerlijste aan steenwerk vas te sit, is D. Staal.
Step 8
4.2.3 Laasplek seël
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die materiaal wat gebruik word om die lasplek te seël wanneer gegalvaniseerde toeberoe gebruik word om pype te las, is A. Silikonverseëlaar.
Step 9
4.2.4 Soldeerlas
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Wanneer 'n soldeerlas gemaak word, word die gesmelte soldeersel in die las deur 'n B. trek aksie ingetrek.
Step 10
4.2.5 Dakkappe aan muur
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Om dakkappe aan 'n muur vas te sit, kan jy nylonstrappe of A. gebruik.
Step 11
4.3 Swaardiensuithoudbyt
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Een plek waar 'n swaardiensuithoudbyt (Rawbout) gebruik kan word, is in die konstruksie van trappe.
Step 12
4.4.1 Totale oppervlak wat gepleister moet word
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die totale oppervlak wat gepleister moet word, is 56.57 m², wat ontstaan uit die berekening van die buiteoppervlak minus die venster- en deuropening.
Step 13
4.4.2 Volume pleister
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Die volume pleister wat benodig word, is 0.015 m³, wat verkry word deur die oppervlak te vermenigvuldig met die dikte van die pleister, 0.56extm2imes0.015extm=0.015extm3.
