NSC Civil Technology Civil Services Identification and installation of sanitary fitments: 3.1 Give ONE word/term for each

Question

3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below. Write only the word/term next to the question numbers (3.1.1 to 3.1.5) in the ANSWER BOOK. e.g. 3.1.6 gutter

1 : 40; solid ground; spirit level; 228 mm x 38 mm; 150 mm; 76 mm x 50 mm; 144 mm x 38 mm; surveyor's site level; 1 : 90; boning rod; 1 : 60; water-logged ground; 400 mm.

3.1.1 The dimensions of struts used for shoring

3.1.2 Excavation conditions requiring the presence of an engineer at all times

3.1.3 The slope at which a 225 mm diameter pipe is laid

3.1.4 The device which could be used for setting out drain levels on shorter distances

3.1.5 The recommended basic thickness of layers for backfilling

FIGURE 3.2 below is a picture of a worker who is removing a manhole cover.

3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Civil Services - Question 3 - 2022 - Paper 1

Worked Solution & Example Answer:3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Civil Services - Question 3 - 2022 - Paper 1

3.1.1 The dimensions of struts used for shoring

3.1.2 Excavation conditions requiring the presence of an engineer at all times

3.1.3 The slope at which a 225 mm diameter pipe is laid

3.1.4 The device which could be used for setting out drain levels on shorter distances

3.1.5 The recommended basic thickness of layers for backfilling

Join the NSC students using SimpleStudy...