6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Civil Services - Question 6 - 2017 - Paper 1
Question 6
6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure. (4 × 1)
6.2 Make neat sketches to illu... show full transcript
Worked Solution & Example Answer:6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Civil Services - Question 6 - 2017 - Paper 1
Step 1
Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Determine the needs of the owners.
Determine the arrangement of rooms.
Determine arrangement of windows and doors.
Show dimensions.
Step 2
Make neat sketches to illustrate the following symbols:
6.2.1 Water closet
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A water closet sketch should depict a typical toilet bowl combined with a cistern, labeled clearly for identification.
Step 3
Make neat sketches to illustrate the following symbols:
6.2.2 Sink
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A sink sketch should show a rectangular basin with a faucet, alongside drain features and labeled appropriately.
Step 4
Make neat sketches to illustrate the following symbols:
6.2.3 Water meter
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A water meter sketch should illustrate a circular device with inlet and outlet pipes, indicating it measures water usage, clearly labeled.
Step 5
In which working drawing is the entrance to a site indicated?
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The entrance to a site is indicated in the site plan.
Step 6
6.4 Draw, on SHEET D, the south elevation on scale 1 : 50
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To draw the south elevation:
Begin with the floor level marked at 200mm.
Draw the wall to a height of 2,600mm above the floor.
Position Window 1 (600mm x 200mm) and Door 1 (1,400mm x 200mm) accurately relative to the layout.
Incorporate the door knob in the correct position.
Indicate the roof construction pitch of 30° by constructing slanted lines from the wall tops.
Ensure to illustrate the gable end at the west elevation, and a hipped roof at the east elevation, following dimensions and features as specified.
