3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Civil Services - Question 3 - 2022 - Paper 1
Question 3
3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below. Write only the word/term next to the question numbers (3.1... show full transcript
Worked Solution & Example Answer:3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Civil Services - Question 3 - 2022 - Paper 1
Step 1
3.1.1 The dimensions of struts used for shoring
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The dimensions of struts used for shoring are typically 76 mm x 50 mm.
Step 2
3.1.2 Excavation conditions requiring the presence of an engineer at all times
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Excavation conditions that require an engineer at all times typically include scenarios where the ground is unstable or when deep excavations are being made.
Step 3
3.1.3 The slope at which a 225 mm diameter pipe is laid
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The slope at which a 225 mm diameter pipe is laid is generally 1 : 90.
Step 4
3.1.4 The device which could be used for setting out drain levels on shorter distances
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A spirit level is commonly used for setting out drain levels over shorter distances.
Step 5
3.1.5 The recommended basic thickness of layers for backfilling
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The recommended basic thickness of layers for backfilling is typically 150 mm.
