NSC Civil Technology Woodworking Grading and preservation of timber: 4.1 Choose a description from CO

Question

4.1 Choose a description from COLUMN B that matches an item in COLUMN A.
Write only the letter (A–L) next to the question numbers (4.1.1 to 4.1.8) in the ANSWER BOOK, e.g. 4.1.9 M.

COLUMN A                          COLUMN B

4.1.1 Jig saw                      A   sanding can be done in any direction
4.1.2 Orbital sander            B   ensure that the cutting tool rests on the tool rest
4.1.3 Morticing machine      C   apply wax to the sole so that the machine glides easily across the work piece
4.1.4 Radial arm saw              D   always lock the tool rest 200 mm from the stock
4.1.5 Spindle moulder           E   check the tension of the blade before cutting commences
4.1.6 Lathe                         F   tension applied to the sanding belt should not exceed its strength
4.1.7 Router                       G   avoid shaping pieces of timber shorter than 250 mm
4.1.8 Band saw                   H   do not force material onto the chisel or drill bit
                                   I   do not force material onto the sanding belt
                                   J   to cut out circles, first drill a hole to insert the blade
                                   K   avoid making adjustments while the blade is rotating
                                   L   lock the table at one height for all work to be done

4.1 Choose a description from COLUMN B that matches an item in COLUMN A - NSC Civil Technology Woodworking - Question 4 - 2022 - Paper 1

Worked Solution & Example Answer:4.1 Choose a description from COLUMN B that matches an item in COLUMN A - NSC Civil Technology Woodworking - Question 4 - 2022 - Paper 1

4.1.1 Jig saw

4.1.2 Orbital sander

4.1.3 Morticing machine

4.1.4 Radial arm saw

4.1.5 Spindle moulder

4.1.6 Lathe

4.1.7 Router

4.1.8 Band saw

Join the NSC students using SimpleStudy...