NSC Civil Technology Woodworking Identification and use of woodworking tools: 1.1 Give ONE word/term for each

Question

1.1  Give ONE word/term for each of the following descriptions. Write only the word/term next to the question numbers (1.1 to 1.1.5) in the ANSWER BOOK, e.g. 1.1.1 preservative.

1.1.1  Can be melted again because no chemical process is involved

1.1.2  The coating of a metal by using the process of electrolysis

1.1.3  The process of keeping freshly cast concrete moist/damp for a specific period

1.1.4  Available in a matt and gloss finish

1.1.5  A process used to coat steel with a layer of zinc

1.2  FIGURE 1.2 below shows a ladder that is used on a construction site.

1.2.1  Why should non-skid material be fitted to the bottom end of the stiles of a ladder?

1.2.2  Explain why it is better to use a wooden ladder when working near electrical cables.

1.2.3  Explain why you would prefer to use an aluminium ladder instead of a wooden ladder.

1.2.4  Name TWO methods that can be used to treat wooden ladders.

1.3  Describe TWO safety regulations that a scaffold platform must adhere to.

1.4  Name TWO places on a building site where safety nets should be erected to ensure the safety of the workers.

1.5  FIGURE 1.5 below shows a joining fixture.

1.5.1  Identify the joining fixture.

1.5.2  Explain the first THREE steps you would follow to attach a bracket to a brick wall by using the fixture above after the position of the hole has been marked.

1.6  Complete in your ANSWER BOOK the information in the table below by indicating ONE use and ONE way to care for the tool.

NAME OF TOOL  |  USE  |  WAY TO CARE FOR
Dumpy level  |  To determine...  |  Protect the dumpy level by...

1.1 Give ONE word/term for each of the following descriptions - NSC Civil Technology Woodworking - Question 1 - 2022 - Paper 1

Worked Solution & Example Answer:1.1 Give ONE word/term for each of the following descriptions - NSC Civil Technology Woodworking - Question 1 - 2022 - Paper 1

1.1.1 Can be melted again because no chemical process is involved

1.1.2 The coating of a metal by using the process of electrolysis

1.1.3 The process of keeping freshly cast concrete moist/damp for a specific period

1.1.4 Available in a matt and gloss finish

1.1.5 A process used to coat steel with a layer of zinc

1.2.1 Why should non-skid material be fitted to the bottom end of the stiles of a ladder?

1.2.2 Explain why it is better to use a wooden ladder when working near electrical cables.

1.2.3 Explain why you would prefer to use an aluminium ladder instead of a wooden ladder.

1.2.4 Name TWO methods that can be used to treat wooden ladders.

1.3 Describe TWO safety regulations that a scaffold platform must adhere to.

1.4 Name TWO places on a building site where safety nets should be erected to ensure the safety of the workers.

1.5.1 Identify the joining fixture.

1.5.2 Explain the first THREE steps you would follow to attach a bracket to a brick wall by using the fixture above after the position of the hole has been marked.

1.6 Complete in your ANSWER BOOK the information in the table below by indicating ONE use and ONE way to care for the tool.

Join the NSC students using SimpleStudy...