Photo AI

VRAAG 2: GRAFIKA AS KOMMUNIKASIEMMIDDEL (GENERIES) Begin hierdie vraag op 'n NUWE bladsjy - NSC Civil Technology Woodworking - Question 2 - 2023 - Paper 1

Question icon

Question 2

VRAAG-2:-GRAFIKA-AS-KOMMUNIKASIEMMIDDEL-(GENERIES)-Begin-hierdie-vraag-op-'n-NUWE-bladsjy-NSC Civil Technology Woodworking-Question 2-2023-Paper 1.png

VRAAG 2: GRAFIKA AS KOMMUNIKASIEMMIDDEL (GENERIES) Begin hierdie vraag op 'n NUWE bladsjy. FIGUUR A en FIGUUR B op die volgende bladsjy toon tekeninge wat op 'n bou... show full transcript

Worked Solution & Example Answer:VRAAG 2: GRAFIKA AS KOMMUNIKASIEMMIDDEL (GENERIES) Begin hierdie vraag op 'n NUWE bladsjy - NSC Civil Technology Woodworking - Question 2 - 2023 - Paper 1

Step 1

Give ONE reason why FIGURE B represents the first floor plan.

96%

114 rated

Answer

Figure B shows the layout of rooms and dimensions indicating it is the first floor of the building.

Step 2

Name the SI unit that is used to indicate dimensions on building plans.

99%

104 rated

Answer

The SI unit used to indicate dimensions on building plans is the millimetre (mm).

Step 3

Identify number 3.

96%

101 rated

Answer

Number 3 is identified as a sliding door or patio door.

Step 4

Identify the number indicating the emergency exit.

98%

120 rated

Answer

The number indicating the emergency exit is 2.

Step 5

What is the purpose of number 3?

97%

117 rated

Answer

The purpose of number 3 is to provide access to the balcony and to enhance the aesthetic of the living space.

Step 6

Identify number 4.

97%

121 rated

Answer

Number 4 is identified as a window sill.

Step 7

Identify number 5.

96%

114 rated

Answer

Number 5 is identified as a gutter.

Step 8

Identify number 6.

99%

104 rated

Answer

Number 6 is identified as a downpipe or rainwater pipe.

Step 9

Identify number 7.

96%

101 rated

Answer

Number 7 is identified as a balcony or cantilever slab.

Step 10

Determine the dimensions from the window schedule of dimensions of the window that is installed at number 8.

98%

120 rated

Answer

The dimensions of the window installed at number 8 are 900 mm × 600 mm or 0.9 m × 0.6 m.

Step 11

Who is the owner of the new dwelling?

97%

117 rated

Answer

The owner of the new dwelling is Mr. Ntombi.

Step 12

Name the elevation where the sink is located.

97%

121 rated

Answer

The sink is located at the east elevation.

Step 13

Identify the safety error in FIGURE A.

96%

114 rated

Answer

The safety error in FIGURE A is that there are no balustrades or safety rails on the balcony.

Step 14

Deduce from the building plan why it was not approved after the first submission.

99%

104 rated

Answer

The building plan was not approved after the first submission because the drawing of the internal staircase was omitted.

Step 15

How many signatures must be indicated on this building plan?

96%

101 rated

Answer

There should be 2 signatures indicated on the building plan.

Step 16

What are the dimensions for the balusters as indicated by the architect?

98%

120 rated

Answer

The dimensions for the balusters are Ø 50 mm × 1200 mm.

Step 17

Name the material that must be used for the final finishing of the outside wall.

97%

117 rated

Answer

The material to be used for the final finishing of the outside wall is plaster and paint.

Step 18

Describe the end shape of the balustrades.

97%

121 rated

Answer

The end shape of the balustrades is round or circular.

Step 19

How many hinged openings are indicated on Window 1 in the window schedule?

96%

114 rated

Answer

There is one hinged opening indicated on Window 1 in the window schedule.

Step 20

Draw the symbol for finished wood for the boardroom table.

99%

104 rated

Answer

The symbol for finished wood for the boardroom table is represented with a textured pattern.

Step 21

Draw the electrical symbol for a three-pole one-way switch.

96%

101 rated

Answer

The electrical symbol for a three-pole one-way switch is a circle with three lines indicating the poles.

Step 22

How many fluorescent tubes are indicated in the office?

98%

120 rated

Answer

There are 2 fluorescent tubes indicated in the office.

Step 23

Calculate the total height of the wall on the left side of the building from the finished floor level. Give your answer in meter.

97%

117 rated

Answer

The total height of the wall on the left side is calculated as:

2955+2955+3000=8.91extm2 955 + 2 955 + 3 000 = 8.91 ext{ m}

Step 24

Calculate thearea of the exterior wall on the ground floor, that will consist of bricks, from the finished floor level to the top of the floor slab in the south elevation in FIGURE A. Show ALL calculations.

97%

121 rated

Answer

The area of the exterior wall is calculated as:

(2955imes8000)(2imes1200)=23640extm22880extm2=20760extmm2(2 955 imes 8 000) - (2 imes 1 200) = 23 640 ext{ m}^2 - 2 880 ext{ m}^2 = 20 760 ext{ mm}^2

Join the NSC students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;