Determine the output state of the op amp in FIGURE 4.1 below for the conditions in TABLE 4.1 when V1 and V2 are in phase - NSC Electrical Technology Digital - Question 4 - 2024 - Paper 1
Question 4
Determine the output state of the op amp in FIGURE 4.1 below for the conditions in TABLE 4.1 when V1 and V2 are in phase.
FIGURE 4.1: OPERATIONAL AMPLIFIER
TABLE 4... show full transcript
Worked Solution & Example Answer:Determine the output state of the op amp in FIGURE 4.1 below for the conditions in TABLE 4.1 when V1 and V2 are in phase - NSC Electrical Technology Digital - Question 4 - 2024 - Paper 1
Step 1
4.1.1 If V1 < V2
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
When V1 is less than V2, the op-amp will output a negative voltage. This happens because the non-inverting input (+) receives a lower voltage than the inverting input (-). Thus, the output state will be low, leading to:
Vout = 0 V (Negative output state)
Step 2
4.1.2 If V1 = V2
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
In this scenario, when both V1 and V2 are equal, the op-amp will ideally output zero volts. Since there is no difference between the inputs, the output state will be:
