QUESTION 2: SAFETY (GENERIC)
2.1 State ONE important safety rule that should be adhered to before any machine in the mechanical workshop is switched on - NSC Mechanical Technology Automotive - Question 2 - 2019 - Paper 1
Question 2
QUESTION 2: SAFETY (GENERIC)
2.1 State ONE important safety rule that should be adhered to before any machine in the mechanical workshop is switched on.
2.2 Give O... show full transcript
Worked Solution & Example Answer:QUESTION 2: SAFETY (GENERIC)
2.1 State ONE important safety rule that should be adhered to before any machine in the mechanical workshop is switched on - NSC Mechanical Technology Automotive - Question 2 - 2019 - Paper 1
Step 1
State ONE important safety rule that should be adhered to before any machine in the mechanical workshop is switched on.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Before switching on any machine in the mechanical workshop, it is crucial to check that all safety guards are in place to prevent injuries.
Step 2
Give ONE reason why you need to clamp down a small work piece before any drilling is done.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Clamping down a small work piece is essential to ensure stability and prevent movement during drilling, which could lead to accidents or inaccurate work.
Step 3
State TWO safety rules you should observe before a hydraulic press is used.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Ensure that all operators are aware of the hydraulic press's operational procedures and are trained to use it safely.
Always check that the safety guards are properly fitted and functioning before use.
Step 4
Give TWO reasons why you have to use surgical gloves when treating a co-worker with open wounds.
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To prevent transmission of infections such as HIV/AIDS or any other blood-related diseases.
To protect the open wounds from contamination, ensuring a safer treatment environment.
Step 5
State TWO safety precautions that must be taken into consideration for the safe handling of portable electrical equipment.
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Ensure that the electrical cord and plug are in good condition and that all safety guards are in place.
Do not operate the machine/equipment while it is wet or if the wires are tangled.
Step 6
State ONE responsibility of an employer regarding safety in the work place.
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
An employer is responsible for providing and maintaining working systems, work areas, and equipment in a safe condition.
Step 7
State ONE responsibility of an employee regarding safety in the work place.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
An employee must always adhere to health and safety protocols outlined by the employer to ensure a safe work environment.
