Photo AI
SAFETY (GENERIC) 2.1 Explain TWO first-aid measures to consider when treating an open wound - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2021 - Paper 1
Question 2
SAFETY (GENERIC) 2.1 Explain TWO first-aid measures to consider when treating an open wound. 2.2 State TWO safety precautions that must be adhered to after the sur... show full transcript
Worked Solution & Example Answer:SAFETY (GENERIC) 2.1 Explain TWO first-aid measures to consider when treating an open wound - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2021 - Paper 1
Step 1
Explain TWO first-aid measures to consider when treating an open wound.
Answer
-
Use Surgical Gloves: Wearing surgical gloves prevents contamination of the wound and protects both the patient and the responder from potential infections.
-
Apply Pressure to Stop Bleeding: If the wound is bleeding, applying firm pressure with a clean cloth or bandage can help control the bleeding.
Step 2
State TWO safety precautions that must be adhered to after the surface grinder has been switched on.
Answer
-
Do Not Leave the Grinder Unattended: Ensuring that an operator is present can prevent accidents that may occur if the machine is left running without supervision.
-
Check for Loose Parts: Before operating, ensure that all guards are in place and check for any loose or worn parts to prevent machine failure.
Step 3
Step 4
Which TWO hazards are prevented by the finger protectors fitted to power-driven guillotines?
Answer
-
Preventing Finger Cuts: The finger protectors prevent the hazard of getting fingers caught or cut by the blades.
-
Preventing Crushing Injuries: They also prevent fingers from being crushed by hold-down devices.
Step 5
State TWO safety measures to be considered before gas welding or flame cutting operations can be performed.
Answer
-
Ensure Proper Ventilation: The area must be well-ventilated to avoid the buildup of flammable gases.
-
Check for Flammable Materials: All flammable materials should be removed or secured away from the work area to minimize fire hazards.
Step 6