Photo AI
2.1 Which TWO safety precautions must be observed when working with a coil spring compressor? 2.2 State THREE safety precautions that should be observed before pressing a bearing from a shaft using a hydraulic press - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2017 - Paper 1
Question 2
2.1 Which TWO safety precautions must be observed when working with a coil spring compressor? 2.2 State THREE safety precautions that should be observed before pres... show full transcript
Worked Solution & Example Answer:2.1 Which TWO safety precautions must be observed when working with a coil spring compressor? 2.2 State THREE safety precautions that should be observed before pressing a bearing from a shaft using a hydraulic press - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2017 - Paper 1
Step 1
Step 2
State THREE safety precautions that should be observed before pressing a bearing from a shaft using a hydraulic press.
Answer
- Take notice of the predetermined pressure of the hydraulic press.
- Ensure the pressure gauge is in good working order.
- Ensure the platform on which the work piece rests is rigid and square with the cylinder of the press.
Step 3
Step 4
Name ONE distinct safety precaution when using EACH of the following items of testing equipment:
Answer
2.4.1 Brinell tester: The tester must be mounted rigidly on a worktable. 2.4.2 Gear and bearing puller: Make sure that the puller is at 90° to the work piece before you start to pull. 2.4.3 Torsion tester: Get specification (torsion) of the different materials and the size of rods you would like to test.