SAFETY (GENERIC)
2.1 Explain TWO first-aid measures to consider when treating an open wound - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2021 - Paper 1
Question 2
SAFETY (GENERIC)
2.1 Explain TWO first-aid measures to consider when treating an open wound.
2.2 State TWO safety precautions that must be adhered to after the sur... show full transcript
Worked Solution & Example Answer:SAFETY (GENERIC)
2.1 Explain TWO first-aid measures to consider when treating an open wound - NSC Mechanical Technology Welding and Metalwork - Question 2 - 2021 - Paper 1
Step 1
Explain TWO first-aid measures to consider when treating an open wound.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Use surgical gloves to avoid contamination and protect both the caregiver and the patient.
Cover the wound with a clean, lint-free cloth to protect it from dirt and bacteria.
Step 2
State TWO safety precautions that must be adhered to after the surface grinder has been switched on.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Never leave the grinder unattended while it is in operation to prevent accidents.
Do not put hands near the workpiece while the grinder is in motion to avoid injury.
Step 3
Give ONE reason why the pressure gauge of a hydraulic press must be calibrated frequently.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To ensure accurate readings, which is essential for the safe operation of the hydraulic press.
Step 4
Which TWO hazards are prevented by the finger protectors fitted to power-driven guillotines?
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The finger protectors prevent the risk of fingers being cut by blades.
They help to avoid fingers being crushed by the hold-downs.
Step 5
State TWO safety measures to be considered before gas welding or flame cutting operations can be performed.
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Ensure that the area is free of flammable materials to prevent fires.
Confirm that the operator has received instruction on safe equipment usage.
Step 6
Which type of workshop layout is shown in FIGURE 2.6 below?
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
