A system consisting of a septic tank and percolation area is frequently used for the treatment of sewage from a dwelling house in a rural setting - Leaving Cert Construction Studies - Question 8 - 2006
Question 8
A system consisting of a septic tank and percolation area is frequently used for the treatment of sewage from a dwelling house in a rural setting.
(a) Using notes a... show full transcript
Worked Solution & Example Answer:A system consisting of a septic tank and percolation area is frequently used for the treatment of sewage from a dwelling house in a rural setting - Leaving Cert Construction Studies - Question 8 - 2006
Step 1
Design of the septic tank
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The design of the septic tank consists of pre-cast units or can be constructed on site. It generally has the following characteristics:
The tank receives wastewater from the dwelling house via a dip pipe with a diameter of 100 mm.
It is constructed on a reinforced concrete foundation.
The minimum size of the tank is 2725 litres.
The tank length should be three times its width, and it must maintain a minimum distance of 1.5 metres below the water level.
The capacity of the tank can be calculated using the formula: C=(180P+2000) Litres
where P is the number of persons served (minimum of 4 persons).
The tank may be pre-cast or built in situ.
Step 2
Location of the septic tank
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The location of the septic tank must adhere to the following guidelines:
It should be at a minimum distance of 7 meters from the dwelling it serves and at least 20 meters from the nearest point of any other dwelling.
The site must be suitable for regularly emptying when needed.
The tank must be installed in an area where adequate percolation can be achieved. It is important to perform percolation tests on all sites where a dwelling house is to be built.
Additionally, the tank must be located at least 3 meters from a road or boundary and at least 30 meters away from any well or drinking source.
Step 3
Function of the percolation area
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The function of the percolation area is crucial for treating septic tank effluent, and it serves to:
Facilitate the percolation of the septic tank effluent and replace soils that act as the final stage of treatment.
Allow wastewater to infiltrate the soil, where it is further treated by the action of aerobic bacteria.
Prevent effluent from reaching the underlying groundwater directly, promoting filtration before entering the aquifer.
Step 4
List one advantage and one disadvantage of a septic tank and percolation area system
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Advantages of a septic tank and percolation area:
It is suitable for dwelling houses in rural areas as it offers an independent sewage treatment solution and does not require connection to a municipal sewage system.
It is a relatively cheap system to operate and requires low maintenance if constructed properly.
Disadvantage:
It may not adequately treat the waste in rural areas, leading to potential pollution of nearby watercourses. There is a risk of the effluent reaching rivers and wells, which can be harmful to the environment.
Join the Leaving Cert students using SimpleStudy...