Details of a Soap Holder are given in Fig - Leaving Cert DCG - Question C-5 - 2012
Question C-5
Details of a Soap Holder are given in Fig. C-5 with the parts list tabulated below. A 3D graphic of the individual parts is also shown.
Note: Some of the parts have... show full transcript
Worked Solution & Example Answer:Details of a Soap Holder are given in Fig - Leaving Cert DCG - Question C-5 - 2012
Step 1
Wall mount: Outline
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Begin by sketching the outline of the wall mount, ensuring to represent the dimensions accurately as given in the figure. The wall mount features a circular outer edge with dimensions specified, and it transitions into the stem integration point. Detail this transition carefully.
Step 2
Wall mount: Hole
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Add the hole of diameter 10mm as per the specifications. Positioning should be centered appropriately on the wall mount part as indicated in the figure.
Step 3
Wall mount: Completion
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Complete the wall mount representation by adding any additional features such as alignment marks. Ensure clarity in line weights to signify different features like cut surfaces.
Step 4
Stem: Correct shape and diameter
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
For the stem, render its cylindrical shape with a diameter of 10mm. Note the differentiation from the wall mount, as the stem is more elongated and should clearly depict its proportions.
Step 5
Stem: Threaded ends
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Indicate the threaded ends on the stem. These should be clearly defined in your drawing format to distinguish them from the smooth sections.
Step 6
Dish Support: Outline
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Draw the outline of the dish support, making sure it accurately reflects the dimensions indicated in the figure. The dish support has a rectangular base.
Step 7
Dish Support: Hole
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Please draw the hole through the dish support, ensuring it corresponds to the indicated 10mm diameter and that it runs through the center of the base.
Step 8
Dish Support: Completion
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Finalize the dish support by enhancing the outline for clarity, ensuring that all features align and present a functional support for the soap dish.
Step 9
Soap Dish: Outline
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Illustrate the soap dish, which is circular with dimensions provided in the diagram. Capture the characteristics of both the outer rim and the inner basin.
Step 10
Soap Dish: Completion
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Complete the drawing of the soap dish by incorporating details such as potential curves at the rim and ensuring the base is flat.
Step 11
Screw: Head (incl. slot)
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Represent the screw head with a slot feature on top, making sure to note the dimensions and distinguishing the head from the screw shaft.
Step 12
Screw: Shaft (incl. threads)
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Sketch the screw shaft, including the threading along the length. Ensure the threads are depicted in a way that emphasizes their functionality in assembly.
Step 13
Drawing Completion: Hatching and Centrelines
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Incorporate hatching for sectioned parts and use centerlines where necessary to indicate symmetry and alignment within the assembly.
Step 14
Drawing Completion: Presentation
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Finally, review the drawing to ensure it adheres to presentation standards, including line quality, dimensioning, and overall visual coherence.
Join the Leaving Cert students using SimpleStudy...
