10.1 – Investigating Conservation of Energy on a Ramp (Leaving Cert Physics): Quizzes

📚Quizzes
Revision NotesModel AnswersQuizzesFlashcardsExam Questions
10.1 – Investigating Conservation of Energy on a Ramp
Sign up to keep practising.Create a free account to play more quizzes and track your progress.

Practise the questions

12 questions from this quiz

Show

What is the main aim of the trolley-and-pulley experiment?

To investigate conservation of energy

What energy transformation occurs as the weight falls and the trolley moves?

Potential energy to kinetic energy

Which piece of equipment is essential for measuring the trolley's velocity?

Motion sensor

What mass should be placed on the scale pan at the start of the experiment?

Approximately 200g

Why is one end of the runway raised slightly during setup?

To minimize friction effects

How many measurements of height and velocity should be recorded?

Five

What is the formula for calculating the loss in potential energy?

msghm_s g h

What is the formula for calculating the gain in kinetic energy?

12mtotalv2\frac{1}{2} m_{total} v^2

Which masses must be included when calculating the kinetic energy?

Trolley and falling weight

What relationship should be observed if energy is conserved?

Loss in PE equals gain in KE

What fundamental principle does this experiment demonstrate?

Conservation of mechanical energy

How would friction affect the experimental results?

KE gain would be less than PE loss

Explore Leaving Cert Physics Revision Notes by Topics

3.1 – Calculations of Refraction of Light

3.1 – Calculations of Refraction of Light

3.2 – Measuring the Critical Angle and Refractive Index

3.2 – Measuring the Critical Angle and Refractive Index

4.1 – Verifying the Lens Equation

4.1 – Verifying the Lens Equation

5.1 – Investigating Constant Velocity Using a Trolley or Rider

5.1 – Investigating Constant Velocity Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

Show more

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

8.1 – Investigating Force, Mass and Acceleration Relationships

8.1 – Investigating Force, Mass and Acceleration Relationships

8.2 – Investigating Conservation of Momentum

8.2 – Investigating Conservation of Momentum

9.1 – Determining Acceleration Due to Gravity

9.1 – Determining Acceleration Due to Gravity

10.1 – Investigating Conservation of Energy on a Ramp

10.1 – Investigating Conservation of Energy on a Ramp

12.1 – Investigating Work and Energy in Stretching or Compression

12.1 – Investigating Work and Energy in Stretching or Compression

12.2 – Verifying Hooke’s Law

12.2 – Verifying Hooke’s Law

13.1 – Investigating Alcohol as a Thermometer Liquid

13.1 – Investigating Alcohol as a Thermometer Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.2 – Determining the Latent Heat of Fusion and Vaporisation

14.2 – Determining the Latent Heat of Fusion and Vaporisation

16.1 – Verifying the Stretching of a Spring (Tension Model)

16.1 – Verifying the Stretching of a Spring (Tension Model)

17.1 – Measuring the Wavelength of Light

17.1 – Measuring the Wavelength of Light

22.1 – Investigating Current and Voltage Relationships

22.1 – Investigating Current and Voltage Relationships

22.2 – Investigating Resistance in Series and Parallel

22.2 – Investigating Resistance in Series and Parallel

22.3 – Investigating the Effect of Temperature on Resistance

22.3 – Investigating the Effect of Temperature on Resistance

23.1 – Investigating Current and Voltage in a Filament Lamp

23.1 – Investigating Current and Voltage in a Filament Lamp

24.1 – Investigating Current and Voltage in a Semiconductor Diode

24.1 – Investigating Current and Voltage in a Semiconductor Diode

Explore Leaving Cert Physics Model Answers by Topics

3.1 – Calculations of Refraction of Light

3.1 – Calculations of Refraction of Light

3.2 – Measuring the Critical Angle and Refractive Index

3.2 – Measuring the Critical Angle and Refractive Index

4.1 – Verifying the Lens Equation

4.1 – Verifying the Lens Equation

5.1 – Investigating Constant Velocity Using a Trolley or Rider

5.1 – Investigating Constant Velocity Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

Show more

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

8.1 – Investigating Force, Mass and Acceleration Relationships

8.1 – Investigating Force, Mass and Acceleration Relationships

8.2 – Investigating Conservation of Momentum

8.2 – Investigating Conservation of Momentum

9.1 – Determining Acceleration Due to Gravity

9.1 – Determining Acceleration Due to Gravity

10.1 – Investigating Conservation of Energy on a Ramp

10.1 – Investigating Conservation of Energy on a Ramp

12.1 – Investigating Work and Energy in Stretching or Compression

12.1 – Investigating Work and Energy in Stretching or Compression

12.2 – Verifying Hooke’s Law

12.2 – Verifying Hooke’s Law

13.1 – Investigating Alcohol as a Thermometer Liquid

13.1 – Investigating Alcohol as a Thermometer Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.2 – Determining the Latent Heat of Fusion and Vaporisation

14.2 – Determining the Latent Heat of Fusion and Vaporisation

16.1 – Verifying the Stretching of a Spring (Tension Model)

16.1 – Verifying the Stretching of a Spring (Tension Model)

17.1 – Measuring the Wavelength of Light

17.1 – Measuring the Wavelength of Light

22.1 – Investigating Current and Voltage Relationships

22.1 – Investigating Current and Voltage Relationships

22.2 – Investigating Resistance in Series and Parallel

22.2 – Investigating Resistance in Series and Parallel

22.3 – Investigating the Effect of Temperature on Resistance

22.3 – Investigating the Effect of Temperature on Resistance

23.1 – Investigating Current and Voltage in a Filament Lamp

23.1 – Investigating Current and Voltage in a Filament Lamp

24.1 – Investigating Current and Voltage in a Semiconductor Diode

24.1 – Investigating Current and Voltage in a Semiconductor Diode

Explore Leaving Cert Physics Flashcards by Topics

3.1 – Calculations of Refraction of Light

3.1 – Calculations of Refraction of Light

3.2 – Measuring the Critical Angle and Refractive Index

3.2 – Measuring the Critical Angle and Refractive Index

4.1 – Verifying the Lens Equation

4.1 – Verifying the Lens Equation

5.1 – Investigating Constant Velocity Using a Trolley or Rider

5.1 – Investigating Constant Velocity Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

Show more

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

8.1 – Investigating Force, Mass and Acceleration Relationships

8.1 – Investigating Force, Mass and Acceleration Relationships

8.2 – Investigating Conservation of Momentum

8.2 – Investigating Conservation of Momentum

9.1 – Determining Acceleration Due to Gravity

9.1 – Determining Acceleration Due to Gravity

10.1 – Investigating Conservation of Energy on a Ramp

10.1 – Investigating Conservation of Energy on a Ramp

12.1 – Investigating Work and Energy in Stretching or Compression

12.1 – Investigating Work and Energy in Stretching or Compression

12.2 – Verifying Hooke’s Law

12.2 – Verifying Hooke’s Law

13.1 – Investigating Alcohol as a Thermometer Liquid

13.1 – Investigating Alcohol as a Thermometer Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.2 – Determining the Latent Heat of Fusion and Vaporisation

14.2 – Determining the Latent Heat of Fusion and Vaporisation

16.1 – Verifying the Stretching of a Spring (Tension Model)

16.1 – Verifying the Stretching of a Spring (Tension Model)

17.1 – Measuring the Wavelength of Light

17.1 – Measuring the Wavelength of Light

22.1 – Investigating Current and Voltage Relationships

22.1 – Investigating Current and Voltage Relationships

22.2 – Investigating Resistance in Series and Parallel

22.2 – Investigating Resistance in Series and Parallel

22.3 – Investigating the Effect of Temperature on Resistance

22.3 – Investigating the Effect of Temperature on Resistance

23.1 – Investigating Current and Voltage in a Filament Lamp

23.1 – Investigating Current and Voltage in a Filament Lamp

24.1 – Investigating Current and Voltage in a Semiconductor Diode

24.1 – Investigating Current and Voltage in a Semiconductor Diode

Explore Leaving Cert Physics Exam Questions by Topics

3.1 – Calculations of Refraction of Light

3.1 – Calculations of Refraction of Light

3.2 – Measuring the Critical Angle and Refractive Index

3.2 – Measuring the Critical Angle and Refractive Index

4.1 – Verifying the Lens Equation

4.1 – Verifying the Lens Equation

5.1 – Investigating Constant Velocity Using a Trolley or Rider

5.1 – Investigating Constant Velocity Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

Show more

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.1 – Investigating Accelerated Motion Using a Trolley or Rider

6.2 – Determining Acceleration Due to Gravity

6.2 – Determining Acceleration Due to Gravity

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

6.3 – Determining Acceleration Due to Gravity Using a Simple Pendulum

7.1 – Verifying the Law of Vector Addition

7.1 – Verifying the Law of Vector Addition

8.1 – Investigating Force, Mass and Acceleration Relationships

8.1 – Investigating Force, Mass and Acceleration Relationships

8.2 – Investigating Conservation of Momentum

8.2 – Investigating Conservation of Momentum

9.1 – Determining Acceleration Due to Gravity

9.1 – Determining Acceleration Due to Gravity

10.1 – Investigating Conservation of Energy on a Ramp

10.1 – Investigating Conservation of Energy on a Ramp

12.1 – Investigating Work and Energy in Stretching or Compression

12.1 – Investigating Work and Energy in Stretching or Compression

12.2 – Verifying Hooke’s Law

12.2 – Verifying Hooke’s Law

13.1 – Investigating Alcohol as a Thermometer Liquid

13.1 – Investigating Alcohol as a Thermometer Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.1 – Determining the Specific Heat Capacity of a Liquid

14.2 – Determining the Latent Heat of Fusion and Vaporisation

14.2 – Determining the Latent Heat of Fusion and Vaporisation

16.1 – Verifying the Stretching of a Spring (Tension Model)

16.1 – Verifying the Stretching of a Spring (Tension Model)

17.1 – Measuring the Wavelength of Light

17.1 – Measuring the Wavelength of Light

22.1 – Investigating Current and Voltage Relationships

22.1 – Investigating Current and Voltage Relationships

22.2 – Investigating Resistance in Series and Parallel

22.2 – Investigating Resistance in Series and Parallel

22.3 – Investigating the Effect of Temperature on Resistance

22.3 – Investigating the Effect of Temperature on Resistance

23.1 – Investigating Current and Voltage in a Filament Lamp

23.1 – Investigating Current and Voltage in a Filament Lamp

24.1 – Investigating Current and Voltage in a Semiconductor Diode

24.1 – Investigating Current and Voltage in a Semiconductor Diode

Join 100,000+ Leaving Cert students studying Quizzes with us.

Select your subjects, and get access to A+ resources today.